Ballyhoo Bait Net and Island Anchor

The sturdy 3/4" x  8' Island Anchor Pole is built for boats up to 22'.  Turbo-Tip is made from Stainless Steel and designed to dig  into those hard packed sandy bottoms.  Extremely strong aircraft-grade fiberglass construction will provide years of trouble-free service.  The rugged T-handle allows easy driving, has extra thick ribs and is thru-bolted for toughness. Proudly Made in the USA by Salty Adventures. 

• Qty 1    3/4" Diameter   8' long (94" nominal)
• Choose your Color (Black or White)
• Built for boats up to 22'
  
• Turbo-Tip is made from Stainless Steel and designed to dig into those hard packed sandy bottoms
• Extremely strong aircraft-grade fiberglass construction will provide years of trouble-free service
• Rugged T-Handle has extra thick ribs and is thru-bolted 
• 1 Year Warranty
• Proudly Made in the USA by Salty Adventures
  

Ballyhoo Bait Net is 4 ft in diameter and easily collapses to half it's size for quick storage.  The collapsible hoop net is easy to use and won't spook the fish like a cast net does.  The Ballyhoo Bait Net is much gentler on the bait inside. Healthy bait lives longer, is more lively and produces more strikes. Included storage bag is porous which allows you to rinse and dry your net while still inside the bag.

• Great for catching live Ballyhoo
• 4 foot diameter net folds down to 2 foot in diameter for easy storage
• Easier to use than a cast net and does not spook the fish
• Gentler than a cast net resulting in healthy, lively and long lasting bait
• Included Storage Bag allows rinsing and drying while inside the bag
• 3/8" mesh netting, 80lb Fluorocarbon Bridle Lines, 40 ft Handline
• Ferrules are made from 316 Stainless Steel
• Propriety blend of resin used in fiber reinforced poles
• 1 Year Warranty
  
• Manufactured in the USA by Salty Adventures 

The No-Fuss feature allows you to Snap-It-In and Snap-It-Out. Snap Spring clips are made from strong plastic giving years of reliable use. Holds Quickly and Securely.

• Sold in sets of two
• Pick Between 3/4 inch or 1 inch
• No Fuss - Snap-It-In and Snap-It Out
  
• Plastic Construction for years of reliable use
• Holds quickly and securely
• Can be used to hold ladders, paddles, poles ....etc.

If you are ordering these for PVC tubes: PVC is measured in “ID” and not “OD”. Please verify the Outer Diameter of the tube before ordering.

Clip Size: Choose the Outer Diameter of the Round Tube or Rod the clip needs to fit

Salty Adventures Bungee Dock Lines absorb shock to boats, cleats, docks, pylons, and other hardware. The bungee cord is hidden inside the rope, where it acts as a built-in shock absorber. Two foam floats on these bungee dock lines protect the boat from chafing. There's a sliding adjustment at both ends for quick, efficient docking. These dock lines are recommended for docking boats and PWC's up to 3,500 pounds. 4' Bungee Dock Line stretches to 5 1/2'.

• 4' Bungee Dock Line stretches to 5 1/2'
• Acts like a shock absorber to absorb wave action
• Foam Floats prevent chafing

Coupler Parts for the Island Anchor are made from 316 Stainless Steel and allow you to convert your existing pole into a two-piece assembly for easy storage. Made from 316 Stainless Steel, will not rust or stain. Conversion is as easy as cutting the existing pole and gluing on the couplers. Should take about 5 min to convert a pole plus time for the epoxy to dry. Recommend using JB weld epoxy which can be easily purchased online or any hardware store. 

To order.
Select your pole diameter and which gender you need. If you want a mating set, be sure to add both one male and one female.

• Converts Island Anchor into a two-piece assembly for easy storage
• Takes about 5 minutes to convert
  
• Made from 316 Stainless Steel for years of reliable service
• No Rust - No Stain!

• Qty 1    3/4" Diameter   18" long 
• Choose your Color (Black or White)
• Includes 4' Bungee Dock Line with Stainless Steel Hook and Storage Bag
• Built for small Boat, PWC, Jet Ski, Kayak, Paddle Board and Floating Mat
• Compact 18" length easily packs into PWC storage compartment
• Turbo-Tip is made from Stainless Steel and designed to dig  into those hard packed sandy bottoms
• Extremely strong aircraft-grade fiberglass construction will provide years of trouble-free service
• Rugged T-Handle has extra thick ribs and is thru-bolted for toughness
• 1 Year Warranty
• Proudly Made in the USA by Salty Adventures
  

2-piece version of the sturdy of the sturdy 3/4" x  8' Island Anchor Pole. The 2 piece design allows you to break the pole down into 2x 48" sections for easy storage. Built for boats up to 22'.  Turbo-Tip is made from Stainless Steel and designed to dig into those hard packed sandy bottoms.  Extremely strong aircraft-grade fiberglass construction will provide years of trouble-free service. The rugged T-handle allows easy driving, has extra thick ribs, and is thru-bolted for toughness.  Proudly Made in the USA by Salty Adventures.

• Qty 1    3/4" Diameter   8' long (94" nominal)
• Choose your Color (Black or White)
• Breaks down into 2x 48" sections for easy storage
• Built for boats up to 22' 
• Turbo-Tip is made from Stainless Steel and designed to dig into those hard packed sandy bottoms
• Extremely strong aircraft-grade fiberglass construction will provide years of trouble-free service
• Rugged T-Handle has extra thick ribs and is thru-bolted
• 1 Year Warranty
• Proudly Made in the USA by Salty Adventures
  

Bungee Dock Lines absorb shock to boats, cleats, docks, pylons, and other hardware. Stainless Steel hook quickly locks onto Bow Eye or cleat. The bungee cord is hidden inside the rope, where it acts as a built-in shock absorber. Two foam floats on these bungee dock lines protect the boat from chafing. There's a sliding adjustment at both ends for quick, efficient docking. These dock lines are recommended for docking boats and PWC's up to 3,500 pounds. 4' Bungee Dock Line stretches to 5 1/2'.

• 4' Bungee Dock Line stretches to 5 1/2'
• Stainless Steel hook quickly locks onto Bow Eye or cleat
• Acts like a shock absorber to absorb wave action
• Foam Floats prevent chafing

Replacement T-Handle.  Easily replace broken handles.

• Pick Between 3/4 inch or 1 inch
  
• Plastic Construction for years of reliable use
  
• Easy to replace

Please measure the Outside Diameter of your pole to assure proper fit. 

Replacement Instructions: 

1. Remove old handle. You can use a Dremel tool to slice the tube portion onto two pieces
2. Drill a 3/16" hole in the guide hole on the handle. Do Not drill all the way thru.
3. Place the handle on the pole and align the hole in the handle with the hole in the pole
4. Drill the second hole in the handle using the hole in the pole as a guide.
5. Use screws from old handle to secure the new handle.